Profession, focus, quality and service

17 Years Manufacturing and R&D Experience
page_head_bg_01
page_head_bg_02
page_head_bg_03

Factory making UV Water Filter Aquarium - Medium Pressure UV Sterilizer – Guanyu

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Using a total scientific good quality management process, superior high quality and excellent faith, we get great name and occupied this field for UV Lamps For Water Disinfection, In Line UV Sterilizer, An Ozone Generator, We sincerely welcome both equally international and domestic company associates, and hope to work along with you during the in close proximity to foreseeable future!
Factory making UV Water Filter Aquarium - Medium Pressure UV Sterilizer – Guanyu Detail:

Characteristics Of The Equipment

Medium pressure ultraviolet lamp tube: using medium pressure high quality imported lightsources from the United States, high power, reduce the number of lamp tube configuration, can handle large flow water. Compared with the low pressure ultraviolet lamp tube, the ultraviolet ray intensity is big, the radiation ray wavelength is wide.

Temperature probe: immediately detect the temperature of water to ensure that the equipment operates at the operating temperature of 0~45 degrees.

Temperature probe: immediately detect the temperature of water to ensure that the equipment operates at the operating temperature of 0~45 degrees.

Quartz tube: in order to better protect the ultraviolet lamp tube, each ultraviolet lamp tube will have a quartz tube outside. Therefore, the quality of the quartz sleeve largely determines the sterilization effect of the uvb sterilizer. The high-quality quartz sleeve can ensure the uv penetration rate of more than 90%.

Daily cleaning: due to the irradiation of water quality and ultraviolet light, the surface of the quartz casing will crystallize after a period of use. If the thickness of the crystal reaches a certain degree, the penetration ratio of ultraviolet ray will be affected. Therefore, the quartz casing needs to be cleaned regularly. The medium pressure uv sterilizer is equipped with an automatic cleaning system, which can automatically clean the quartz sleeve according to the reading of the uv intensity detector. During the cleaning process, the system runs normally without water cut or manual participation, which greatly reduces the workload of field personnel.

Technology Parameter

Equipment model

Disinfection of power（KW)

Flow rat（T/H)

Size of inlet and outlet

The power supply voltage

UUVC-1/1.0KW

1.0

30-40

DN100

220V50Hz

UUVC-1/2.0KW

2.0

60-80

DN125

220V50Hz

UUVC-1/3.0KW

3.0

100-125

DN150

220V50Hz

UUVC-2/2.0KW

4.0

130-150

DN200

380V50Hz

UUVC-2/3.0KW

6.0

200-250

DN250

380V50Hz

UUVC-3/3.0KW

9.0

250-300

DN250

380V50Hz

Equipment Installation Schematic Diagram

Equipment Installation Schematic Diagram

Common Troubleshooting Methods

The fault Why Elimination method
The quartz tube is leaking at the end 1. Quartz tube is broken;
2. The end gland is not tightened
3. Washer damage		 1. Replace the quartz tube;
2. Tighten the cover screw evenly until it is watertight, and do not over tighten it.
3.Replace the washer
Low bactericidal efficiency 1. Low voltage;
2. External wall attachment of quartz tube;
3. The radiation intensity of the lamp tube is lower than 70U.
4. Reach the normal service time of the lamp tube
5. Excess of rated flow
6. Impurities, minerals and suspended substances in the water exceed the standard		 1. Adjust voltage;
2. Clean quartz tube;
3. Replace the tube.
4. Replace the tube
5. Adjust the flow or increase the equipment
6. Add filter device or increase equipment
Lampis not bright 1. Dissolve broken silk and burn it off;
2. The lamp socket is not properly plugged in;
3. The plug inside the socket breaks off;
4. Whether the ballast is damaged;
5. Whether the led tube is damaged;
6. Whether the bridge is broken;
7.Lamp tube damaged		 1. Replace dissolved broken silk;
2. Plug in the socket;
3. If the insert piece is removed and welded, then welded firmly;
4. Or replace the socket
5. Any damage found must be replaced.
6. Replace the tube.
The power cord or plug is unusually hot and has a burning smell Weak cable carrying capacity Replace the cable

Influent Quality

(drinking water) water inlet requirements

hardness

<50mg/L

The iron content

<0.3mg/L

sulfide

<0.05mg/L

Suspended solids

<10mg/L

Manganese content

<0.5mg/L

 chroma

＜15degrees

The temperature

5℃-60℃

(sewage) inlet water requirement index

COD

<50mg/L

BOD

<10mg/L

Suspended solids

<10mg/L

PH

6.0-9.0

chroma

<30

turbidity

<10NTU

The water temperature

5℃-60℃

Routine Inspection And Testing

● every 4-5 weeks after the use of the equipment, the equipment should be checked, pay attention to the following abnormal conditions

● the power cord or plug is unusually hot with a burning smell.

● welding part of the pipe, the interface part, whether the two ends of the quartz pipe leak.

● control cabinet indicator light, lamp tube is normally lit.

● low sterilization efficiency.

● other abnormal faults.

In case of any of the above situations, stop using the equipment to prevent accidents. Be sure to follow “common troubleshooting methods” to troubleshoot. If the troubleshooting still cannot be eliminated, please contact our company and its agents and resellers.

Note: blue, green and yellow colors at both ends of the tube are normal phenomena.

Product detail pictures:

Related Product Guide:
Using a complete scientific top quality management program, great high-quality and fantastic religion, we win great track record and occupied this area for Factory making UV Water Filter Aquarium - Medium Pressure UV Sterilizer – Guanyu, The product will supply to all over the world, such as: Mexico, luzern, Portugal, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
5 Stars By Sandy from Curacao - 2017.08.21 14:13
High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
5 Stars By Victor Yanushkevich from Estonia - 2018.11.22 12:28

RELATED PRODUCTS